Building blocks for the AI era
GPU cooling and supports, edge-AI mounts, calibration boards, and robotics fixtures. Modeled from the real interface, printed in engineering-grade materials, and measured with calipers before they ship.
A Wisdom Systems AI product, powered by Wisdom Engine.
The AI wave is physical. Behind every model is a rig that has to be cooled, braced, mounted, and calibrated. We treat that hardware layer like engineering, not afterthought.
Most of this layer is improvised today: zip ties, sagging cards, paper checkerboards that warp. Quarkpad replaces it with parts that are parametric, modeled from the real interface, and dimensionally honest.
Engineering-grade materials, not trinkets. Flame-retardant polycarbonate (PC FR) rated to 115C where heat matters, carbon-fiber nylon and PET where strength does. Every critical interface is checked with calipers before it leaves the bench.
Send your measurements and we regenerate the part to your size. Same building block, your dimensions.
Passive datacenter GPUs like the Tesla P40, P100, and M40 run inference cheaply, if you can keep them cool. Quarkpad shrouds duct a quiet case fan straight onto the card.
Printed in flame-retardant polycarbonate (PC FR) so it survives a hot GPU where PETG would sag, with built-in zip-tie and screw channels.
Flame-retardant polycarbonate (PC FR), 115C rated. 120, 92, and 80mm fan options.
Pi 5 and Jetson boards go into cabinets, walls, and machines. Quarkpad mounts give them vented standoffs, keyhole wall slots, and a snap-on 35mm DIN-rail clip for industrial enclosures.
Flame-retardant polycarbonate (PC FR), because a deployed board lives somewhere warm.
Keyhole and DIN-rail ready. Pi 5, Jetson Orin Nano, custom carriers to order.
Manipulation data needs cameras you can trust. Quarkpad calibration targets are printed-in two-color, dead flat, with 25.0mm squares ready for OpenCV. Paper warps; this does not.
Plus camera mounts, grippers, and fixtures for data-collection rigs.
OpenCV 8x6 ready. Matte black squares kill glare for cleaner corner detection.
Pick a part from the catalog, or send the measurements for your GPU, carrier board, or calibration pattern. Every part is parametric, so a custom size is one email away.
Parts are printed on a Bambu Lab X1 Carbon in engineering-grade material, then every critical interface is checked with calipers against the model. No "should fit".
Catalog parts ship within 2 business days. Custom regenerations and lab builds are quoted with a clear lead time, so you can plan around it.
Each part below is the actual printed geometry, recentered and lit on a clean stage. Drag to rotate; scroll to zoom.
Ducts a quiet case fan onto a passive datacenter GPU so it can run in a home rig.
drag to rotate
The anti-sag support is a telescoping pillar: a rod slides inside a tube and pins at your exact height with one M3 bolt. Scroll to pull it apart.
From a single homelab GPU to a bimanual data-collection rig. Every part is parametric, so a custom size is one email away.
Cool passive Tesla P40, P100, and M40 datacenter GPUs in a home AI rig.
Flame-retardant polycarbonate (PC FR), 115C rated. 120, 92, and 80mm fan options. Built-in zip-tie and screw channels.
Stops heavy cards from cracking their solder under their own weight.
Telescoping carbon-fiber PET-CF pillar, 75 to 145mm, pin-locked. Non-marring card-edge cradle.
Mount a board on a wall, in a cabinet, or on a machine, cleanly.
Vented standoff plate, keyhole wall slots, optional 35mm DIN-rail clip. Flame-retardant polycarbonate (PC FR).
Make any project industrial-cabinet ready in seconds.
Snaps onto standard 35mm rail; two countersunk M3 holes bolt it to anything. Flame-retardant polycarbonate (PC FR) so the snap arm flexes without cracking.
The cheapest upgrade a build photo can get.
8-pin, 12VHPWR, and 24-pin combs with retention teeth for a clean sleeved-cable run.
Lab-grade calibration without the lab-grade invoice.
Two-color printed-in checkerboard, dead flat, 25.0mm squares, OpenCV 8x6 ready. Matte black squares kill glare.
A rigid wrist-camera bolt point for robot data-collection rigs.
Carbon-fiber nylon 3-prong action-camera interface on a 4-bolt base.
Every critical interface is measured against the model before it ships. No guesswork.
Send your measurements and we regenerate the part to your exact size.
Engineering-grade polycarbonate, carbon-fiber nylon, and PET. Not trinkets.
Printed on a Bambu Lab X1 Carbon for repeatable, dimensionally honest parts.
Robot foundation models are bottlenecked on manipulation data, and the rigs that collect it are open designs with no reliable supply chain. We build, assemble, and calibrate them so your researchers do not spend lab hours on filament settings.
Engineering-grade only. Flame-retardant polycarbonate (PC FR) rated to 115C for anything near a hot GPU, carbon-fiber nylon (PA-CF) and PET-CF for structural parts, and TPU 95A for soft fingertips. We pick the material to the load, not the lowest cost.
Yes. Every part on this page comes from parametric CAD. Send the measurements for your GPU, carrier board, or calibration pattern and we regenerate the design to your dimensions, then QC it with calipers before shipping.
Catalog parts ship within 2 business days. Custom regenerations and lab builds are quoted with a clear lead time up front so you can plan around it.
We do. Bulk pricing is available on catalog parts, and full lab builds (SO-101 arms, grippers, bimanual rigs) are configured to your pipeline and quoted per build. Email info@wisdomsystems.ai with quantities and what you are building.
Parts are modeled from the real interface and every critical dimension is measured with calipers against the model before shipping. Parts are aftermarket accessories, so we ask you to confirm fitment for your exact hardware; if anything is off, we make it right.
A different GPU, an unusual carrier board, a bigger calibration pattern. Send the measurements and we rebuild the design to your size and ship it, usually within 2 business days.
Request a custom partQuestions, custom sizes, bulk and lab orders, or just reaching out. A real person replies within one business day.
Prefer email? Reach us at info@wisdomsystems.ai.